the shuttle miner is the wheel type shuttle mine car which we often say. it often appears in the tunnel and the well and lane construction. it is mainly used for the transportation and storage of the ballast and ore. the working environment of shuttle tramcar is usually very complicated, so operators need to be able to understand certain rules.
1. shunting operators need special training, and can be familiar with the performance, structure and principle of the shuttle miner. then, after the test is qualified, the operation certificate can be obtained.
2. before the operation is carried out, the iron wedge and various tools need to be prepared and the lubricating parts are processed according to the regulations; the bogies, the connecting pin and the traction rod are carefully checked; the electric shuttle bus needs to check the damage degree of the cable skin and whether the electrical device is damp and wet, some incompatible or impeding the safety. it should be repaired or replaced in time. do not work when the state is not normal.
3. before the ballast is loaded, the shuttle type tramcar needs to carry out the no-load operation to observe whether the transmission parts are abnormal. the transmission chain and scraper transport chain need not be relaxed.
4. electric shuttle buses need to wear special insulating gloves when they are connected to the power supply, and the pneumatic shuttle bus should be slightly applied to check the joint after it is connected to the wind pipe.
of course, after the completion of the operation, it is necessary to wash the car body and then park it in a designated location. this is the reasonable operation of the shuttle miner.
