four principles should be followed in the disassembly and disassembly of slag grilled machine-88038威尼斯

now most of the slag scraper is downhole operation, so the skimming machine basically needs to be disassembled before downloading. because of the size of the hole in the hole, sometimes the slagging machine may be disassembled. when the slagging machine is sent to the downhole installation, we need to pay attention to some details, and the machine can teach you how to disassemble and disassemble the slag machine. most of the slag scraper is downhole operation before the dismantling machine is removed from the well. therefore, the skimming machine basically needs to be disassembled before downloading. because of the size of the hole in the hole, sometimes the slagging machine may be disassembled. when the slagging machine is sent to the downhole installation, we need to pay attention to some details, and the machine can teach you how to disassemble and disassemble the slag machine. the disassembly and disassembly of the slagging machine before the next well should follow the principle of "big", that is, try not to disassemble the machine too scattered, for some important bad installation (or easy to make mistakes, easily lost parts) to protect, try not to disassemble. if disassembly is necessary, all parts must be kept well. first, when assembling the slagging machine, we must tighten the bolts in each position, and check whether the washer is fit or not, whether it meets the current actual demand. two, when installing hydraulic components, a little attention should be paid to cleaning the hydraulic system to ensure its cleanliness and completeness. at the same time, the sealing ring should be checked to ensure its integrity, and the entry of dust and residue can be avoided and the service life of the machine is affected. three, after the machine is installed, a comprehensive check should be made to the whole machine to prevent unnecessary failures due to negligence. four, when installing the circuit equipment of the explosion-proof scraper, we must find professionals to install it. (the circuit is the main motive force of most slag grilled machine, so its safety is very important.) the disassembly and disassembly of the slag scraper is related to whether the slag grinder can be used normally, so it must be tested well before the installation work, and then work again.