wheel type slag remover is a kind of continuous loading solid solid material, such as stone slag. the ideal equipment for coal mining is to excavate and load more than 80m3 per hour, especially for small and medium-sized cross section roadway slag. at the same time, the wheel slagging machine is driven by 2 15 kilowatt motors and 1 23 kilowatt diesel engines to drive the hydraulic system. there is no dust pollution in the roadway. because it is the rubber wheel walking, it does not need special treatment of the roadbed, nor does it need to lay the track to adapt to the poor excavation surface.
the crawler slagging machine is a full hydraulic crawler structure, using a unique backhoe system to pick up rock (or ore), pick rock (or ore) into a central scraper transport trough, and transfer the rock (or ore) from the former to the subsequent equipment (all types of miners, belts, cars, etc.) by the scraper transport mechanism. at the same time, the bucket of track scraper can also be used to clean up the working face. the chassis design of the equipment is based on the structure of the komatsu excavator, and uses the hydraulic motor to drive the crawler walking mechanism. it has strong performance, high climbing ability and flexible maneuver, and can work in the wet and watertight laneway.
the technological content of tracked vehicles is not higher than the wheel type, but the walking mechanism and transmission system are much more complex than the wheel type. the driving loss of the tracked vehicles is far higher than the wheel type, so the purchase cost and the operating cost are much higher.
